The Short Answer
For concrete block (CBS) walls in Miami, use this:
- Paint: 100% acrylic masonry paint, or an elastomeric coating on walls that take direct rain.
- Primer: Block filler on bare block. It fills the pores so the finish coat does not soak in.
- Sheen: Flat or satin.
- How long it lasts: About 5 to 8 years on walls that stay dry. Less on perimeter walls that sit in wet soil.
Why Paint Fails Early on Concrete Block Walls
Most Miami-Dade homes are built from concrete block. Block is porous, so it pulls in moisture from rain and from the ground. That moisture pushes paint off from behind.
South Florida throws three things at paint: UV almost every day of the year, humidity that rarely drops, and rain that comes in sideways all summer. Products that last ten years up north can fail in three here. That is why the type of paint matters more than the brand name on the can.
Prep Steps That Make It Last
- Pressure wash and treat mildew.
- Brush off any white powdery salt deposits and find where the moisture is coming from.
- Apply block filler to bare block.
- Caulk the joints where the wall meets windows, doors and the slab.
Prep is most of the job. On a typical project, more time goes into prep than into painting. It is also the part you cannot see when the job is done, which is why it gets skipped.
How Long It Lasts
About 5 to 8 years on walls that stay dry. Less on perimeter walls that sit in wet soil.
Those numbers assume good prep and two full coats. Sun exposure matters too. The south and west sides of a house wear out first.
The Mistake to Avoid
Skipping block filler. Bare block drinks paint, and you end up with pinholes that let water straight in.
Want it handled? See our exterior painting service or call (786) 363-7039.