What Alabaster Looks Like
Alabaster is a soft, warm white. It is creamy without turning yellow, which is why it has been one of the most used whites in the country for years.
- Brand: Sherwin-Williams
- Color code: SW 7008
- Light reflectance (LRV): about 82. That is high, so it bounces a lot of light back into the room.
- Color family: White and off white
- Undertone: Warm
How Alabaster Reads in Miami Light
South Florida sun is strong and it comes in at a high angle most of the year. Light colors like Alabaster look a full step brighter here than they do on the paint chip. In a room with south or west windows it can wash out to nearly white by mid afternoon.
Its warm undertone gets warmer in afternoon sun. Under cool white LED bulbs it calms down, so check your bulbs before you blame the paint.
Stark whites can glare in Miami sun. Alabaster takes the edge off. On stucco it gives you a white house that does not hurt to look at at noon, and it sits well next to barrel tile roofs.
One thing most color guides skip: impact windows. Many have a slight green or gray tint, and that tint changes how every color in the room reads. Always judge a sample inside your own house, with your own glass.
Alabaster on a Stucco Exterior
Light colors are the safe pick for a Miami exterior. Alabaster reflects heat, hides chalking, and fades slowly because there is not much pigment to lose. The trade off is that mildew and dirt streaks show sooner, mostly on north walls and under roof lines. Plan on a gentle wash once a year to keep it clean.
If you live in an HOA community, get the color approved in writing before any paint goes on the wall. Many Kendall area associations keep an approved palette, and they can make you repaint if you skip that step.
Painting the outside? See how we handle exterior painting in Miami-Dade.
Best Rooms and Finishes for Alabaster
Whole house walls, trim, ceilings and cabinets. It is one of the few whites that works on all four.
The finish matters as much as the color. Here is what we suggest:
- Living rooms and bedrooms: matte or eggshell. It hides wall flaws, and most walls have a few.
- Kitchens, bathrooms and laundry rooms: satin. It handles humidity and wipes clean.
- Trim, doors and cabinets: semi gloss. It takes a beating and cleans up easily.
- Exterior stucco: flat or low sheen. Shiny paint shows every wave in the stucco.
Painting inside? Here is how our interior painting works.
Colors That Go With Alabaster
These pair well with Alabaster. Each one has its own guide:
- Agreeable Gray (Sherwin-Williams, SW 7029)
- Accessible Beige (Sherwin-Williams, SW 7036)
- Iron Ore (Sherwin-Williams, SW 7069)
With a white like Alabaster on the walls, paint the trim the same color in semi gloss. Same color, different sheen. It is a clean look and you only buy one color.
Test Alabaster Before You Commit
Do not pick a color from a phone screen. Get a sample and paint two coats on a board or straight on the wall, at least two feet square. Look at it in the morning, at midday, and at night with your lights on. Put it next to your floor and your countertops, because those are not changing.
Want a second opinion before you buy five gallons? Call or text us at (786) 363-7039. We paint homes across Kendall and Miami-Dade and we are happy to talk it through.