Guide

Pure White (SW 7005) in Miami Homes

How Sherwin-Williams Pure White really looks in South Florida sun, on stucco, and room by room.

1

What Pure White Looks Like

Pure White is a clean white with just a drop of warmth, enough to keep it from feeling cold. It is a go to for trim and doors.

  • Brand: Sherwin-Williams
  • Color code: SW 7005
  • Light reflectance (LRV): about 84. That is high, so it bounces a lot of light back into the room.
  • Color family: White and off white
  • Undertone: Balanced, close to neutral
2

How Pure White Reads in Miami Light

South Florida sun is strong and it comes in at a high angle most of the year. Light colors like Pure White look a full step brighter here than they do on the paint chip. In a room with south or west windows it can wash out to nearly white by mid afternoon.

It stays fairly balanced from morning to evening, which makes it one of the easier colors to live with.

It stays white in strong sun without going blue. That makes it a safe trim color next to almost any wall color, inside or outside.

One thing most color guides skip: impact windows. Many have a slight green or gray tint, and that tint changes how every color in the room reads. Always judge a sample inside your own house, with your own glass.

3

Pure White on a Stucco Exterior

Light colors are the safe pick for a Miami exterior. Pure White reflects heat, hides chalking, and fades slowly because there is not much pigment to lose. The trade off is that mildew and dirt streaks show sooner, mostly on north walls and under roof lines. Plan on a gentle wash once a year to keep it clean.

If you live in an HOA community, get the color approved in writing before any paint goes on the wall. Many Kendall area associations keep an approved palette, and they can make you repaint if you skip that step.

Painting the outside? See how we handle exterior painting in Miami-Dade.

4

Best Rooms and Finishes for Pure White

Trim, doors, ceilings and cabinets everywhere. Walls in modern homes that want a clean gallery look.

The finish matters as much as the color. Here is what we suggest:

  • Living rooms and bedrooms: matte or eggshell. It hides wall flaws, and most walls have a few.
  • Kitchens, bathrooms and laundry rooms: satin. It handles humidity and wipes clean.
  • Trim, doors and cabinets: semi gloss. It takes a beating and cleans up easily.
  • Exterior stucco: flat or low sheen. Shiny paint shows every wave in the stucco.

Painting inside? Here is how our interior painting works.

5

Colors That Go With Pure White

These pair well with Pure White. Each one has its own guide:

With a white like Pure White on the walls, paint the trim the same color in semi gloss. Same color, different sheen. It is a clean look and you only buy one color.

6

Test Pure White Before You Commit

Do not pick a color from a phone screen. Get a sample and paint two coats on a board or straight on the wall, at least two feet square. Look at it in the morning, at midday, and at night with your lights on. Put it next to your floor and your countertops, because those are not changing.

Want a second opinion before you buy five gallons? Call or text us at (786) 363-7039. We paint homes across Kendall and Miami-Dade and we are happy to talk it through.

Frequently asked questions

Is Pure White a good color for Miami homes?

Yes. Pure White is a strong pick for South Florida homes. Light colors keep rooms feeling open, bounce daylight around, and stay cooler on exterior walls. With an LRV around 84, it can look very bright in a sunny room, so test a sample on a south or west wall before you commit. Outside, it will show mildew sooner than a mid tone, so plan on a light wash once a year. It stays white in strong sun without going blue. That makes it a safe trim color next to almost any wall color, inside or outside.

What undertones does Pure White have?

Pure White is a clean white with just a drop of warmth, enough to keep it from feeling cold. It is a go to for trim and doors. It stays fairly balanced from morning to evening, which makes it one of the easier colors to live with. Undertones show up most next to other things. Hold the sample against your tile, your counters and your trim. If something in the room suddenly looks pink, green or yellow, that is the undertone talking. One thing most color guides skip: impact windows. Many have a slight green or gray tint, and that tint changes how every color in the room reads. Always judge a sample inside your own house, with your own glass.

Can I use Pure White outside on stucco in South Florida?

Light colors are the safe pick for a Miami exterior. Pure White reflects heat, hides chalking, and fades slowly because there is not much pigment to lose. The trade off is that mildew and dirt streaks show sooner, mostly on north walls and under roof lines. Plan on a gentle wash once a year to keep it clean. Whatever the color, use a 100% acrylic exterior paint and two full coats over stucco that has been washed, repaired and primed where needed. If you live in an HOA community, get the color approved in writing before any paint goes on the wall. Many Kendall area associations keep an approved palette, and they can make you repaint if you skip that step.

What colors go with Pure White?

Pure White pairs well with Agreeable Gray (Sherwin-Williams), Repose Gray (Sherwin-Williams) and Naval (Sherwin-Williams). With a white like Pure White on the walls, paint the trim the same color in semi gloss. Same color, different sheen. It is a clean look and you only buy one color. Keep the number of colors low. Most homes look best with one main wall color, one trim color and one accent. Check every pairing in your own light before you buy, because Miami sun shifts colors more than the store lights do.

Ready to start your project?

We are a family-owned, fully insured remodeling company. Call for a free estimate. No pressure, no obligation.

This guide is also available in Spanish.

Leer en Espanol

© 2026 Broke & Fixed Home Solutions. All rights reserved.

Call NowFree Estimate